Acoustic Insight

In development

See whether the work is done the way the standard says.

The Standardized Work Tracker follows how assemblers move through each step and compares it with standard work. A wrist wearable and a fixed anchor at the station do the sensing. There are no cameras.

LinePartsAnchor12345
  • Standard work
  • Path taken
  • Extra reach, over standard

Illustrative example

Standard work is written down. Is it being followed?

Standard work sets out the best-known way to do each job: the steps, their order and how long each should take.

Whether it is followed on the line often comes down to someone standing at the station with a stopwatch. That shows a few cycles, on one shift, while they are watching.

What it measures

Step order

Whether the steps happen in the defined sequence, cycle after cycle.

Time against standard

How long each step takes against the standard, and where a cycle runs over.

Movement

The path the hand takes through the work zone, and the extra reach that adds time.

Cycle: 43 s against 36 s standard

Illustrative example

  1. 1. Pick up harness6 s
  2. 2. Route to bracket9 s
  3. 3. Seat connector+6 s
  4. 4. Secure clip7 s
  5. 5. Release to line5 s

How it works

It runs on the Acoustic Insight wearable platform, the same family as AI Connector Pokayoke, and it is a separate product.

  1. Define the standard work

    The steps for the station, their order and their target times.

  2. The assembler wears the wearable

    It senses the movement of the hand as they work.

  3. The anchor places the hand

    A fixed anchor at the station is the reference point, so the system knows where the wrist is in the work zone.

  4. Compare with the standard

    The system lines up what happened against the standard and shows where, and when, the work departs from it.

No cameras on the line

Tracking comes from a wearable and a fixed anchor, not from video. Nothing records the assembler’s face or the product.

Connected through ARCX

ARCX is our line-side controller partner. Its compact PLC, mounted line side, is the integration into line control and the source of the build and assembler information.

arcx.com (opens in a new tab)

Questions

What is the Standardized Work Tracker?

A wrist wearable and a fixed anchor at the station that follow how an assembler moves through the job and compare it with the standard work for that station.

Does it use cameras?

No. Position and motion come from the wearable and the anchor.

How is it different from AI Connector Pokayoke?

AI Connector Pokayoke listens for one event, the click of a connector seating, and confirms it at that moment. The Standardized Work Tracker follows the whole job against standard work. They are separate products on the same wearable platform.

How does it connect to line control?

Through ARCX, the same line-side integration as the rest of Acoustic Insight. An ARCX controller is a compact PLC mounted line side, and it is where all the build and assembler information comes from.

Is it available today?

The Standardized Work Tracker is in development, and we are opening conversations with manufacturers about what it should measure. Get in touch to talk about your station.

Tell us how your standard work is checked today.

Or email info@acousticinsight.ca